Module Base.Float

Floating-point representation and utilities.

If using 32-bit OCaml, you cannot quite assume operations act as you'd expect for IEEE 64-bit floats. E.g., one can have let x = ~-. (2. ** 62.) in x = x -. 1. evaluate to false while let x = ~-. (2. ** 62.) in let y = x -. 1 in x = y evaluates to true. This is related to 80-bit registers being used for calculations; you can force representation as a 64-bit value by let-binding.

type t = float
include sig ... end
include Floatable.S with type t := t
type t
val of_float : float ‑> t
val to_float : t ‑> float

max and min will return nan if either argument is nan.

The validate_* functions always fail if class is Nan or Infinite.

include Identifiable.S with type t := t
type t
include sig ... end
val t_of_sexp : Base__.Sexplib.Sexp.t ‑> t
val sexp_of_t : t ‑> Base__.Sexplib.Sexp.t
include Stringable.S with type t := t
type t
val of_string : string ‑> t
val to_string : t ‑> string
include Comparable.S with type t := t
include Comparable_intf.Polymorphic_compare
include Polymorphic_compare_intf.Infix
type t
val (>=) : t ‑> t ‑> bool
val (<=) : t ‑> t ‑> bool
val (=) : t ‑> t ‑> bool
val (>) : t ‑> t ‑> bool
val (<) : t ‑> t ‑> bool
val (<>) : t ‑> t ‑> bool
val equal : t ‑> t ‑> bool
val compare : t ‑> t ‑> int

-1 means "less than", 0 means "equal", 1 means "greater than", and other values should not be returned

val min : t ‑> t ‑> t
val max : t ‑> t ‑> t
val ascending : t ‑> t ‑> int

ascending is identical to compare. descending x y = ascending y x. These are intended to be mnemonic when used like List.sort ~cmp:ascending and List.sort ~cmp:descending, since they cause the list to be sorted in ascending or descending order, respectively.

val descending : t ‑> t ‑> int
val between : t ‑> low:t ‑> high:t ‑> bool
val clamp_exn : t ‑> min:t ‑> max:t ‑> t

clamp_exn t ~min ~max returns t', the closest value to t such that between t' ~low:min ~high:max is true.

Raises if not (min <= max).

val clamp : t ‑> min:t ‑> max:t ‑> t Or_error.t
include Comparator.S with type t := t
type t
type comparator_witness
include Comparable_intf.Validate with type t := t
type t
val validate_lbound : min:t Maybe_bound.t ‑> t Validate.check
val validate_ubound : max:t Maybe_bound.t ‑> t Validate.check
val validate_bound : min:t Maybe_bound.t ‑> max:t Maybe_bound.t ‑> t Validate.check
include Pretty_printer.S with type t := t
type t
val pp : Caml.Format.formatter ‑> t ‑> unit
include Comparable.With_zero with type t := t
type t
val validate_positive : t Validate.check
val validate_non_negative : t Validate.check
val validate_negative : t Validate.check
val validate_non_positive : t Validate.check
val is_positive : t ‑> bool
val is_non_negative : t ‑> bool
val is_negative : t ‑> bool
val is_non_positive : t ‑> bool
val sign : t ‑> Base__.Sign0.t

Returns Neg, Zero, or Pos in a way consistent with the above functions.

val validate_ordinary : t Validate.check

validate_ordinary fails if class is Nan or Infinite.

val nan : t
val infinity : t
val neg_infinity : t
val max_value : t

equal to infinity

val min_value : t

equal to neg_infinity

val zero : t
val one : t
val minus_one : t
val pi : t

The constant pi.

val sqrt_pi : t

The constant sqrt(pi).

val sqrt_2pi : t

The constant sqrt(2 * pi).

val euler : t

Euler-Mascheroni constant (γ).

val epsilon_float : t

The difference between 1.0 and the smallest exactly representable floating-point number greater than 1.0. That is:

epsilon_float = (one_ulp `Up 1.0) -. 1.0

This gives the relative accuracy of type t, in the sense that for numbers on the order of x, the roundoff error is on the order of x *. float_epsilon.

See also: http://en.wikipedia.org/wiki/Machine_epsilon

(Not to be confused with robust_comparison_tolerance.)

val max_finite_value : t
val min_positive_subnormal_value : t

min_positive_subnormal_value = 2 ** -1074min_positive_normal_value = 2 ** -1022

val min_positive_normal_value : t
val to_int64_preserve_order : t ‑> int64 option

An order-preserving bijection between all floats except for nans, and all int64s with absolute value smaller than or equal to 2**63 - 2**52. Note both 0. and -0. map to 0L.

val to_int64_preserve_order_exn : t ‑> int64
val of_int64_preserve_order : int64 ‑> t

returns nan if the absolute value of the argument is too large

val one_ulp : [ `Up | `Down ] ‑> t ‑> t

The next or previous representable float. ULP stands for "unit of least precision", and is the spacing between floating point numbers. Both one_ulp `Up infinity and one_ulp `Down neg_infinity return a nan.

val of_int : int ‑> t
val to_int : t ‑> int
val of_int64 : int64 ‑> t
val to_int64 : t ‑> int64
val round : ?dir:[ `Zero | `Nearest | `Up | `Down ] ‑> t ‑> t

round rounds a float to an integer float. iround{,_exn} rounds a float to an int. Both round according to a direction dir, with default dir being `Nearest.

      | `Down    | rounds toward Float.neg_infinity                             |
      | `Up      | rounds toward Float.infinity                                 |
      | `Nearest | rounds to the nearest int ("round half-integers up")         |
      | `Zero    | rounds toward zero                                           |

iround_exn raises when trying to handle nan or trying to handle a float outside the range [float min_int, float max_int).

Here are some examples for round for each direction:

      | `Down    | [-2.,-1.)   to -2. | [-1.,0.)   to -1. | [0.,1.) to 0., [1.,2.) to 1. |
      | `Up      | (-2.,-1.]   to -1. | (-1.,0.]   to -0. | (0.,1.] to 1., (1.,2.] to 2. |
      | `Zero    | (-2.,-1.]   to -1. | (-1.,1.)   to 0.  | [1.,2.) to 1.                |
      | `Nearest | [-1.5,-0.5) to -1. | [-0.5,0.5) to 0.  | [0.5,1.5) to 1.              |

For convenience, versions of these functions with the dir argument hard-coded are provided. If you are writing performance-critical code you should use the versions with the hard-coded arguments (e.g. iround_down_exn). The _exn ones are the fastest.

The following properties hold:

val iround : ?dir:[ `Zero | `Nearest | `Up | `Down ] ‑> t ‑> int option
val iround_exn : ?dir:[ `Zero | `Nearest | `Up | `Down ] ‑> t ‑> int
val round_towards_zero : t ‑> t
val round_down : t ‑> t
val round_up : t ‑> t
val round_nearest : t ‑> t

rounds half integers up

val round_nearest_half_to_even : t ‑> t

rounds half integers to the even integer

val iround_towards_zero : t ‑> int option
val iround_down : t ‑> int option
val iround_up : t ‑> int option
val iround_nearest : t ‑> int option
val iround_towards_zero_exn : t ‑> int
val iround_down_exn : t ‑> int
val iround_up_exn : t ‑> int
val iround_nearest_exn : t ‑> int
val int63_round_down_exn : t ‑> Int63.t
val int63_round_up_exn : t ‑> Int63.t
val int63_round_nearest_exn : t ‑> Int63.t
val iround_lbound : t

If f <= iround_lbound || f >= iround_ubound, then iround* functions will refuse to round f, returning None or raising as appropriate.

val iround_ubound : t
val is_nan : t ‑> bool
val is_inf : t ‑> bool

includes positive and negative Float.infinity

val min_inan : t ‑> t ‑> t

min and max that return the other value if one of the values is a nan. Returns nan if both arguments are nan.

val max_inan : t ‑> t ‑> t
val (+) : t ‑> t ‑> t
val (-) : t ‑> t ‑> t
val (*) : t ‑> t ‑> t
val (/) : t ‑> t ‑> t
val (~-) : t ‑> t
module Parts : sig ... end with type outer := t

Returns the fractional part and the whole (i.e. integer) part. For example, modf (-3.14) returns { fractional = -0.14; integral = -3.; }!

val modf : t ‑> Parts.t
val mod_float : t ‑> t ‑> t

mod_float x y returns a result with the same sign as x. It returns nan if y is 0. It is basically

 let mod_float x y = x -. float(truncate(x/.y)) *. y

not

 let mod_float x y = x -. floor(x/.y) *. y

and therefore resembles mod on integers more than %.

val add : t ‑> t ‑> t
Ordinary functions for arithmetic operations

These are for modules that inherit from t, since the infix operators are more convenient

val sub : t ‑> t ‑> t
val neg : t ‑> t
val scale : t ‑> t ‑> t
val abs : t ‑> t
module O : sig ... end

A sub-module designed to be opened to make working with floats more convenient.

module O_dot : sig ... end

Similar to O, except that operators are suffixed with a dot, as in the OCaml standard library.

val to_string_round_trippable : t ‑> string

Like to_string, but guaranteed to be round-trippable.

It usually yields as few significant digits as possible. That is, it won't print 3.14 as 3.1400000000000001243. The only exception is that occasionally it will output 17 significant digits when the number can be represented with just 16 (but not 15 or less) of them.

val to_string_hum : ?delimiter:char ‑> ?decimals:int ‑> ?strip_zero:bool ‑> t ‑> string

Pretty print float, for example to_string_hum ~decimals:3 1234.1999 = "1_234.200"to_string_hum ~decimals:3 ~strip_zero:true 1234.1999 = "1_234.2" . No delimiters are inserted to the right of the decimal.

val to_padded_compact_string : t ‑> string

Produce a lossy compact string representation of the float. The float is scaled by an appropriate power of 1000 and rendered with one digit after the decimal point, except that the decimal point is written as '.', 'k', 'm', 'g', 't', or 'p' to indicate the scale factor. (However, if the digit after the "decimal" point is 0, it is suppressed.) The smallest scale factor that allows the number to be rendered with at most 3 digits to the left of the decimal is used. If the number is too large for this format (i.e., the absolute value is at least 999.95e15), scientific notation is used instead. E.g.:

In the case where the digit after the "decimal", or the "decimal" itself are omitted, the numbers are padded on the right with spaces to ensure the last two columns of the string always correspond to the decimal and the digit afterward (except in the case of scientific notation, where the exponent is the right-most element in the string and could take up to four characters).

Numbers in the range -.05 < x < .05 are rendered as "0 " or "-0 ".

Other cases:

Exact ties are resolved to even in the decimal:

val int_pow : t ‑> int ‑> t

int_pow x n computes x ** float n via repeated squaring. It is generally much faster than **.

Note that int_pow x 0 always returns 1., even if x = nan. This coincides with x ** 0. and is intentional.

For n >= 0 the result is identical to an n-fold product of x with itself under *., with a certain placement of parentheses. For n < 0 the result is identical to int_pow (1. /. x) (-n).

The error will be on the order of |n| ulps, essentially the same as if you perturbed x by up to a ulp and then exponentiated exactly.

Benchmarks show a factor of 5-10 speedup (relative to **) for exponents up to about 1000 (approximately 10ns vs. 70ns). For larger exponents the advantage is smaller but persists into the trillions. For a recent or more detailed comparison run the benchmarks.

Depending on context, calling this function might or might not allocate 2 minor words. Even if called in a way that causes allocation, it still appears faster than **.

val ldexp : t ‑> int ‑> t

ldexp x n returns x *. 2 ** n

val frexp : t ‑> t * int

frexp f returns the pair of the significant and the exponent of f. When f is zero, the significant x and the exponent n of f are equal to zero. When f is non-zero, they are defined by f = x *. 2 ** n and 0.5 <= x < 1.0.

external log10 : t ‑> t = "caml_log10_float" "log10"

Base 10 logarithm

external expm1 : t ‑> t = "caml_expm1_float" "caml_expm1"

expm1 x computes exp x -. 1.0, giving numerically-accurate results even if x is close to 0.0.

external log1p : t ‑> t = "caml_log1p_float" "caml_log1p"

log1p x computes log(1.0 +. x) (natural logarithm), giving numerically-accurate results even if x is close to 0.0.

external copysign : t ‑> t ‑> t = "caml_copysign_float" "caml_copysign"

copysign x y returns a float whose absolute value is that of x and whose sign is that of y. If x is nan, returns nan. If y is nan, returns either x or -. x, but it is not specified which.

external cos : t ‑> t = "caml_cos_float" "cos"

Cosine. Argument is in radians.

external sin : t ‑> t = "caml_sin_float" "sin"

Sine. Argument is in radians.

external tan : t ‑> t = "caml_tan_float" "tan"

Tangent. Argument is in radians.

external acos : t ‑> t = "caml_acos_float" "acos"

Arc cosine. The argument must fall within the range [-1.0, 1.0]. Result is in radians and is between 0.0 and pi.

external asin : t ‑> t = "caml_asin_float" "asin"

Arc sine. The argument must fall within the range [-1.0, 1.0]. Result is in radians and is between -pi/2 and pi/2.

external atan : t ‑> t = "caml_atan_float" "atan"

Arc tangent. Result is in radians and is between -pi/2 and pi/2.

external atan2 : t ‑> t ‑> t = "caml_atan2_float" "atan2"

atan2 y x returns the arc tangent of y /. x. The signs of x and y are used to determine the quadrant of the result. Result is in radians and is between -pi and pi.

external hypot : t ‑> t ‑> t = "caml_hypot_float" "caml_hypot"

hypot x y returns sqrt(x *. x + y *. y), that is, the length of the hypotenuse of a right-angled triangle with sides of length x and y, or, equivalently, the distance of the point (x,y) to origin.

external cosh : t ‑> t = "caml_cosh_float" "cosh"

Hyperbolic cosine. Argument is in radians.

external sinh : t ‑> t = "caml_sinh_float" "sinh"

Hyperbolic sine. Argument is in radians.

external tanh : t ‑> t = "caml_tanh_float" "tanh"

Hyperbolic tangent. Argument is in radians.

external sqrt : t ‑> t = "caml_sqrt_float" "sqrt"

Square root.

external exp : t ‑> t = "caml_exp_float" "exp"

Exponential.

external log : t ‑> t = "caml_log_float" "log"

Natural logarithm.

module Class : sig ... end
val classify : t ‑> Class.t

return the Class.t. Excluding nan the floating-point "number line" looks like: 

             t                Class.t    example
           ^ neg_infinity     Infinite   neg_infinity
           | neg normals      Normal     -3.14
           | neg subnormals   Subnormal  -.2. ** -1023.
           | (-/+) zero       Zero       0.
           | pos subnormals   Subnormal  2. ** -1023.
           | pos normals      Normal     3.14
           v infinity         Infinite   infinity
val is_finite : t ‑> bool

is_finite t returns true iff classify t is in Normal; Subnormal; Zero;.

val sign : t ‑> Sign.t
val sign_exn : t ‑> Sign.t

The sign of a float. Both -0. and 0. map to Zero. Raises on nan. All other values map to Neg or Pos.

module Sign_or_nan : sig ... end
val sign_or_nan : t ‑> Sign_or_nan.t
val create_ieee : negative:bool ‑> exponent:int ‑> mantissa:Int63.t ‑> t Or_error.t

These functions construct and destruct 64-bit floating point numbers based on their IEEE representation with sign bit, 11-bit non-negative (biased) exponent, and 52-bit non-negative mantissa (or significand). See wikipedia for details of the encoding: http://en.wikipedia.org/wiki/Double-precision_floating-point_format.

In particular, if 1 <= exponent <= 2046, then:


      create_ieee_exn ~negative:false ~exponent ~mantissa
      = 2 ** (exponent - 1023) * (1 + (2 ** -52) * mantissa)
val create_ieee_exn : negative:bool ‑> exponent:int ‑> mantissa:Int63.t ‑> t
val ieee_negative : t ‑> bool
val ieee_exponent : t ‑> int
val ieee_mantissa : t ‑> Int63.t
module Terse : sig ... end

S-expressions contain at most 8 significant digits.

module Private : sig ... end