Module Regex

module Regex: sig .. end
Although OCaml strings may legally have internal null bytes, it is expensive to check for them, so this library just assumes that it will never see such a string. The failure mode is the search stops early, which isn't bad considering how rare internal null bytes are in practice.


Although OCaml strings may legally have internal null bytes, it is expensive to check for them, so this library just assumes that it will never see such a string. The failure mode is the search stops early, which isn't bad considering how rare internal null bytes are in practice.

Basic Types

type t 
type regex = t 
type id_t = [ `Index of int | `Name of string ] 
Subpatterns are referenced by name if labelled with the /(?P<...>...)/ syntax, or else by counting open-parens, with subpattern zero referring to the whole regex.
val index_of_id_exn : t -> id_t -> int
index_of_id t id resolves subpattern names and indices into indices. *

The sub keyword argument means, omit location information for subpatterns with index greater than sub.

Subpatterns are indexed by the number of opening parentheses preceding them:

~sub:(`Index 0) : only the whole match ~sub:(`Index 1) : the whole match and the first submatch, etc.

If you only care whether the pattern does match, you can request no location information at all by passing ~sub:(`Index -1).

With one exception, I quote from re2.h:443,

> Don't ask for more match information than you will use: > runs much faster with nmatch == 1 than nmatch > 1, and > runs even faster if nmatch == 0.

For sub > 1, re2 executes in three steps: 1. run a DFA over the entire input to get the end of the whole match 2. run a DFA backward from the end position to get the start position 3. run an NFA from the match start to match end to extract submatches sub == 1 lets it stop after (2) and sub == 0 lets it stop after (1). (See re2.cc:692 or so.)

The one exception is for the functions get_matches, replace, and Iterator.next: Since they must iterate correctly through the whole string, they need at least the whole match (subpattern 0). These functions will silently rewrite ~sub to be non-negative.

module Options: Options.S 
val create : ?options:Options.t list -> string -> t Core.Std.Or_error.t
val create_exn : ?options:Options.t list -> string -> t
include Stringable
val num_submatches : t -> int
num_submatches t returns 1 + the number of open-parens in the pattern.

N.B. num_submatches t == 1 + RE2::NumberOfCapturingGroups() because RE2::NumberOfCapturingGroups() ignores the whole match ("subpattern zero").

val pattern : t -> string
pattern t returns the pattern from which the regex was constructed. *
val find_all : ?sub:id_t -> t -> string -> string list Core.Std.Or_error.t
find_all t input a convenience function that returns all non-overlapping matches of t against input, in left-to-right order.

If sub is given, and the requested subpattern did not capture, then no match is returned at that position even if other parts of the regex did match.

val find_all_exn : ?sub:id_t -> t -> string -> string list
val find_first : ?sub:id_t -> t -> string -> string Core.Std.Or_error.t
find_first ?sub pattern input a convenience function around find_all that returns the first match only
val find_first_exn : ?sub:id_t -> t -> string -> string
val find_submatches : t -> string -> string option array Core.Std.Or_error.t
find_submatches t input finds the first match and returns all submatches. Element 0 is the whole match and element 1 is the first parenthesized submatch, etc.
val find_submatches_exn : t -> string -> string option array
val matches : t -> string -> bool
matches pattern input
Returns true iff pattern matches input
val split : ?max:int -> ?include_matches:bool -> t -> string -> string list
split pattern input
Returns input broken into pieces where pattern matches. Subpatterns are ignored.
max : (default: unlimited) split only at the leftmost max matches
include_matches : (default: false) include the matched substrings in the returned list (e.g., the regex /,()/ on "foo(bar,baz)" gives ["foo"; "("; "bar"; ","; "baz"; ")"] instead of ["foo"; "bar"; "baz"])

If t never matches, the returned list has input as its one element.

val rewrite : t -> template:string -> string -> string Core.Std.Or_error.t
rewrite pattern ~template input is a convenience function for replace: Instead of requiring an arbitrary transformation as a function, it accepts a template string with zero or more substrings of the form "\\n", each of which will be replaced by submatch n. For every match of pattern against input, the template will be specialized and then substituted for the matched substring.
val rewrite_exn : t -> template:string -> string -> string
val valid_rewrite_template : t -> template:string -> bool
valid_rewrite_template pattern ~template
Returns true iff template is a valid rewrite template for pattern
val escape : string -> string
escape nonregex
Returns a copy of nonregex with everything escaped (i.e., if the return value were t to regex, it would match exactly the original input)

Infix Operators

module Infix: sig .. end

Complicated Interface

module Match: sig .. end
val get_matches : ?sub:id_t ->
?max:int -> t -> string -> Match.t list Core.Std.Or_error.t
get_matches pattern input returns all non-overlapping matches of pattern against input
sub : (default: all) returned Match.t's will contain only the first sub matches.
max : (default: unlimited) return only the leftmost max matches
val get_matches_exn : ?sub:id_t -> ?max:int -> t -> string -> Match.t list
val replace : ?sub:id_t ->
?only:int ->
f:(Match.t -> string) ->
t -> string -> string Core.Std.Or_error.t
replace ?sub ?max ~f pattern input
Returns an edited copy of input with every substring matched by pattern transformed by f.
only : (default: all) replace only the nth match
f : if f returns None, the original match is put back in; if it returns Some s then s is substituted for the matched string. (So, returning Some "" means delete the matched string.)
val replace_exn : ?sub:id_t ->
?only:int -> f:(Match.t -> string) -> t -> string -> string
module Exceptions: sig .. end
val t_of_sexp : Sexplib.Sexp.t -> t
val sexp_of_t : t -> Sexplib.Sexp.t
val compare : t -> t -> int
val bin_t : t Bin_prot.Type_class.t
val bin_read_t : t Bin_prot.Read_ml.reader
val bin_read_t_ : t Bin_prot.Unsafe_read_c.reader
val bin_read_t__ : (int -> t) Bin_prot.Unsafe_read_c.reader
val bin_reader_t : t Bin_prot.Type_class.reader
val bin_size_t : t Bin_prot.Size.sizer
val bin_write_t : t Bin_prot.Write_ml.writer
val bin_write_t_ : t Bin_prot.Unsafe_write_c.writer
val bin_writer_t : t Bin_prot.Type_class.writer

Subpatterns are referenced by name if labelled with the /(?P<...>...)/ syntax, or else by counting open-parens, with subpattern zero referring to the whole regex.

index_of_id t id resolves subpattern names and indices into indices. *

The sub keyword argument means, omit location information for subpatterns with index greater than sub.

Subpatterns are indexed by the number of opening parentheses preceding them:

~sub:(`Index 0) : only the whole match ~sub:(`Index 1) : the whole match and the first submatch, etc.

If you only care whether the pattern does match, you can request no location information at all by passing ~sub:(`Index -1).

With one exception, I quote from re2.h:443,

> Don't ask for more match information than you will use: > runs much faster with nmatch == 1 than nmatch > 1, and > runs even faster if nmatch == 0.

For sub > 1, re2 executes in three steps: 1. run a DFA over the entire input to get the end of the whole match 2. run a DFA backward from the end position to get the start position 3. run an NFA from the match start to match end to extract submatches sub == 1 lets it stop after (2) and sub == 0 lets it stop after (1). (See re2.cc:692 or so.)

The one exception is for the functions get_matches, replace, and Iterator.next: Since they must iterate correctly through the whole string, they need at least the whole match (subpattern 0). These functions will silently rewrite ~sub to be non-negative.

num_submatches t returns 1 + the number of open-parens in the pattern.

N.B. num_submatches t == 1 + RE2::NumberOfCapturingGroups() because RE2::NumberOfCapturingGroups() ignores the whole match ("subpattern zero").

pattern t returns the pattern from which the regex was constructed. *

find_all t input a convenience function that returns all non-overlapping matches of t against input, in left-to-right order.

If sub is given, and the requested subpattern did not capture, then no match is returned at that position even if other parts of the regex did match.

find_first ?sub pattern input a convenience function around find_all that returns the first match only

find_submatches t input finds the first match and returns all submatches. Element 0 is the whole match and element 1 is the first parenthesized submatch, etc.

matches pattern input

split pattern input

rewrite pattern ~template input is a convenience function for replace: Instead of requiring an arbitrary transformation as a function, it accepts a template string with zero or more substrings of the form "\\n", each of which will be replaced by submatch n. For every match of pattern against input, the template will be specialized and then substituted for the matched substring.

valid_rewrite_template pattern ~template

escape nonregex

Infix Operators


create_exn

input =~ pattern an infix alias of matches

input //~ pattern an infix alias of find_first *

Complicated Interface


A Match.t is the result of applying a regex to an input string

If location information has been omitted (e.g., via ~sub), the error returned is Regex_no_such_subpattern, just as though that subpattern were never defined.

get_all t returns all available matches as strings in an array. For the indexing convention, see comment above regarding sub parameter. *

get_pos_exn ~sub t returns the start offset and length in bytes. Note that for variable-width encodings (e.g., UTF-8) this may not be the same as the character offset and character length.

get_matches pattern input returns all non-overlapping matches of pattern against input

replace ?sub ?max ~f pattern input

Regex_no_such_subpattern (n, max) means n was requested but only max subpatterns are defined (so max - 1 is the highest valid index)

Regex_no_such_named_subpattern (name, pattern)

Match_failed pattern

Regex_submatch_did_not_capture (s, i) means the ith subpattern in the regex compiled from s did not capture a substring.

the string is the C library's error message, generally in the form of "(human-readable error): (piece of pattern that did not compile)"

Regex_rewrite_template_invalid (template, error_msg)