Previous  Up  Next

Module Scheduler

module Scheduler: Scheduler
type t = Raw_scheduler.t 
val t : unit -> t
t () returns the async scheduler. If the scheduler hasn't been created yet, this will create it and acquire the async lock.
val go : ?raise_unhandled_exn:bool -> unit -> Core.Std.never_returns
go ?raise_unhandled_exn () passes control to Async, at which point Async starts running handlers, one by one without interruption, until there are no more handlers to run. When Async is out of handlers it blocks until the outside world schedules more of them. Because of this, Async programs do not exit until shutdown is called.

go () calls handle_signal Sys.sigpipe, which causes the SIGPIPE signal to be ignored. Low-level syscalls (e.g. write) still raise EPIPE.

If any async job raises an unhandled exception that is not handled by any monitor, async execution ceases. Then, by default, async pretty prints the exception, and exits with status 1. If you don't want this, pass ~raise_unhandled_exn:true, which will cause the unhandled exception to be raised to the caller of go ().

val go_main : ?raise_unhandled_exn:bool ->
       main:(unit -> unit) -> unit -> Core.Std.never_returns
go_main is like go, except that one supplies a main function that will be run to initialize the async computation, and that go_main will fail if any async has been used prior to go_main being called.
type 'a with_options = ?work_group:Work_group.t ->
       ?monitor:Import.Monitor.t -> ?priority:Import.Priority.t -> 'a 
val within_context : Import.Execution_context.t -> (unit -> 'a) -> ('a, unit) Core.Std.Result.t
within_context context f runs f () right now with the specified execution context. If f raises, then the exception is sent to the monitor of context, and Error () is returned.
val within' : ((unit -> 'a Import.Deferred.t) -> 'a Import.Deferred.t)
       with_options
within' f ~work_group ~monitor ~priority runs f () right now, with the specified block group, monitor, and priority set as specified. They will be reset to their original values when f returns. If f raises, then the result of within' will never become determined, but the exception will end up in the specified monitor.
val within : ((unit -> unit) -> unit) with_options
within is like within', but doesn't require thunk to return a deferred.
val within_v : ((unit -> 'a) -> 'a option) with_options
within_v is like within, but allows a value to be returned by f.
val schedule' : ((unit -> 'a Import.Deferred.t) -> 'a Import.Deferred.t)
       with_options
Just like within', but instead of running thunk right now, adds it to the async queue to be run with other async jobs.
val schedule : ((unit -> unit) -> unit) with_options
Just like schedule', but doesn't require thunk to return a deferred.
val cycle_start : unit -> Core.Std.Time.t
cycle_start () returns the result of Time.now () called at the beginning of cycle.
val cycle_times : unit -> Core.Std.Time.Span.t Import.Stream.t
cycle_times () returns a stream that will have one element for each cycle that Async runs, with the amount of time that the cycle took (as determined by calls to Time.now at the beginning and end of the cycle).
val report_long_cycle_times : ?cutoff:Core.Std.Time.Span.t -> unit -> unit
report_long_cycle_times ?cutoff () sets up something that will print a warning to stderr whenever there is an async cycle that is too long, as specified by cutoff, whose default is 1s.
val cycle_count : unit -> int
cycle_count () returns the total number of async cycles that have happened.
val force_current_cycle_to_end : unit -> unit
force_current_cycle_to_end () causes no more normal priority jobs to run in the current cycle, and for the end-of-cycle jobs (i.e. writes) to run, and then for the cycle to end.
val is_running : unit -> bool
is_running () returns true if the scheduler has been started.
val set_max_num_jobs_per_priority_per_cycle : int -> unit
set_max_num_jobs_per_priority_per_cycle int sets the maximum number of jobs that will be done at each priority within each async cycle. The default is 500.
type 'b folder = {
   folder :'a. 'b -> t -> (t, 'a) Core.Std.Field.t -> 'b;
}
fold_fields ~init folder folds folder over each field in the scheduler. The fields themselves are not exposed -- folder must be a polymorphic function that can work on any field. So, it's only useful for generic operations, e.g. getting the size of each field.
val fold_fields : init:'b -> 'b folder -> 'b
val is_ready_to_initialize : unit -> bool
val reset_in_forked_process : unit -> unit
If a process that has already created, but not started, the async scheduler would like to fork, and would like the child to have a clean async, i.e. not inherit any of the async work that was done in the parent, it can call reset_in_forked_process at the start of execution in the child process. After that, the child can do async stuff and then start the async scheduler.
val sexp_of_t : t -> Sexplib.Sexp.t

t () returns the async scheduler. If the scheduler hasn't been created yet, this will create it and acquire the async lock.

go ?raise_unhandled_exn () passes control to Async, at which point Async starts running handlers, one by one without interruption, until there are no more handlers to run. When Async is out of handlers it blocks until the outside world schedules more of them. Because of this, Async programs do not exit until shutdown is called.

go () calls handle_signal Sys.sigpipe, which causes the SIGPIPE signal to be ignored. Low-level syscalls (e.g. write) still raise EPIPE.

If any async job raises an unhandled exception that is not handled by any monitor, async execution ceases. Then, by default, async pretty prints the exception, and exits with status 1. If you don't want this, pass ~raise_unhandled_exn:true, which will cause the unhandled exception to be raised to the caller of go ().

go_main is like go, except that one supplies a main function that will be run to initialize the async computation, and that go_main will fail if any async has been used prior to go_main being called.

within_context context f runs f () right now with the specified execution context. If f raises, then the exception is sent to the monitor of context, and Error () is returned.

within' f ~work_group ~monitor ~priority runs f () right now, with the specified block group, monitor, and priority set as specified. They will be reset to their original values when f returns. If f raises, then the result of within' will never become determined, but the exception will end up in the specified monitor.

within is like within', but doesn't require thunk to return a deferred.

within_v is like within, but allows a value to be returned by f.

Just like within', but instead of running thunk right now, adds it to the async queue to be run with other async jobs.

Just like schedule', but doesn't require thunk to return a deferred.

cycle_start () returns the result of Time.now () called at the beginning of cycle.

cycle_times () returns a stream that will have one element for each cycle that Async runs, with the amount of time that the cycle took (as determined by calls to Time.now at the beginning and end of the cycle).

report_long_cycle_times ?cutoff () sets up something that will print a warning to stderr whenever there is an async cycle that is too long, as specified by cutoff, whose default is 1s.

cycle_count () returns the total number of async cycles that have happened.

force_current_cycle_to_end () causes no more normal priority jobs to run in the current cycle, and for the end-of-cycle jobs (i.e. writes) to run, and then for the cycle to end.

is_running () returns true if the scheduler has been started.

set_max_num_jobs_per_priority_per_cycle int sets the maximum number of jobs that will be done at each priority within each async cycle. The default is 500.

fold_fields ~init folder folds folder over each field in the scheduler. The fields themselves are not exposed -- folder must be a polymorphic function that can work on any field. So, it's only useful for generic operations, e.g. getting the size of each field.

If a process that has already created, but not started, the async scheduler would like to fork, and would like the child to have a clean async, i.e. not inherit any of the async work that was done in the parent, it can call reset_in_forked_process at the start of execution in the child process. After that, the child can do async stuff and then start the async scheduler.